NDT inspectors Rope access
SOFT teams
IRATA teams

Visual Inspection or Visual Testing (VT) is the oldest and most basic method of inspection. It is the process of looking over a piece of equipment using "the naked eye" to look for flaws. It requires no equipment except "the naked eye" of a trained inspector.

Magnetic particle Testing (MPT) is a non-destructive testing (NDT) process for detecting surface and slightly subsurface discontinuities in ferromagnetic materials such as iron, nickel, cobalt, and some of their alloys. Magnetic field is used in the testing process of a certain part or surface

Ultrasonic testing (UT) comprises a range of non-destructive testing (NDT) techniques that send ultrasonic waves through an object or material. These high frequency sound waves are transmitted into materials to characterise the material or for flaw detecting. Most UT inspection applications use short pulse waves with frequencies ranging from 0.1-15 MHz, although frequencies up to 50 MHz can be used. One common application for this test method is ultrasonic thickness measurement, which is used to ascertain the thickness of an object such as when assessing pipework corrosion

Eddy Current inspection is one of several NDT methods using the principle of electromagnetism to examine the needed part or surface. Other methods, such as remote field testing (RFT), flux leakage and Barkhausen noise, also use this principle

Dye penetrant inspection (DP), also called liquid penetrate inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to check surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, although for ferrous components magnetic-particle inspection is often used instead for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as hairline cracks, surface porosity, leaks in new products, and fatigue cracks on in-service components

This technique requires the use of UV light in a darkened environment. This is the most sensitive MPI technique and used extensively in the Power Generation and Petrochemical Industry during maintenance inspections. Electromagnet or Portable AC/DC Coil units are used for this inspection technique.

Rope Access rigging & lifting is an excellent solution for installation of both small and large objects such as topsides in the offshore industry. When there is no available infrastructure, we can install, test and certify the required anchor points. After completion of the project, we remove these temporary facilities.

We provide the lifting plans, competent and qualified rope access riggers for all compliant rigging & lifting operations.

Rope Access is the preferred method for blasting and painting work on high buildings for a number of reasons. Firstly, rope access is a much cheaper alternative to erecting work at height solutions such as scaffolding. Secondly, rope access has logistical benefits in that it requires no machinery or heavy equipment which can not only disrupt foot-flow on the ground outside your building but it also bad for the environment. Lastly, rope access is incredibly safe and fast, meaning painting work can be carried out efficiently and quickly.

Significant untapped energy saving potential exists where there is damaged or missing insulation. We offer a complete service of insulation inspection, defect identification and repairs. Using rope access, we are able to inspect difficult to reach areas and reinstate insulation with the minimum of disruption and quickly.

Many of our rope access technicians are also qualified in other mechanical services, so less personnel costs are incurred.

Rope Access supported welders are more cost effective and agile in comparison to conventionally supported workers. This is because rope access requires considerably less infrastructure and setup than scaffolding, elevated platforms and other structurally supported access means. Rope Access Construction workers also have some of the most enviable safety records around, ensuring that the repair job will be as low risk as possible.

Our highly-skilled Hazardous Area Electricians help clients reduce costs, disruption and personnel levels while - most importantly - ensuring that electrical equipment is maintained and inspected to the very highest level.

In the event of fire outbreak, fireproofing the steel in your facility can mean the difference between the facility sustaining damage and a complete and total collapse. Passive fire protection can act as an important complement to the active fire protection systems in oil and gas facilities, petrochemical plants, refineries, power generation facilities and more. Whether it’s a part of a push to make your facility safer or it’s been mandated by an insurance company or auditor, fireproofing your structural steel just makes sense.

We can access inspection and maintenance of utility-scale wind turbine blades and towers. Our rope access teams provide expedient and cost-effective service because they don't rely upon lifts or cranes to complete most work. The work is completed safely, efficiently, and economically with a focus on minimizing downtime of the asset.